| S3 Series http://squadselectseries.com/s3forum/ |
|
| V1 Path and Range DTF http://squadselectseries.com/s3forum/viewtopic.php?f=6&t=2058 |
Page 1 of 1 |
| Author: | OhShix [ Sat Jun 11, 2016 4:46 am ] |
| Post subject: | V1 Path and Range DTF |
Shows the flight path of the Doodle Bugs and the 5 mile range marks to London. Closed launch sites have been deleted. Best viewed without Muzz's map. This will take some coordination between GCI and pilots as the Doodle Bugs are very hard to spot. GCI would call out the position, BLUE 50, indicating a V1 is on the blue path, 50 miles from London. The intercepting pilot would position to one side of the blue line at Angels 6 and wait for the merge call from CGI. Unlikely the intercepting pilot will see the V1 right away. GCI will update the relative V1 position to the pilot until icon is acquired. The Doodle Bugs are very hard to spot from above but hard to catch from below. V1s will maneuver when intercepted and seem to loose speed. A collision will hurt you so watch intercept closing speeds. You will have ammo for two to three interceptions (I am a bad shot) as the V1s are small. Motors will get hot so watch the boost settings. Get some practice in the V1 arena. V1 icons are set to D11 |
|
| Author: | dewolf [ Sat Jun 11, 2016 7:49 am ] |
| Post subject: | Re: V1 Path and Range DTF |
Very nice tool. Thanks. <S> |
|
| Author: | Beaver [ Sat Jun 11, 2016 3:45 pm ] |
| Post subject: | Re: V1 Path and Range DTF |
Looks good, I will need to add it |
|
| Author: | noflyz [ Sat Jun 11, 2016 7:23 pm ] | ||
| Post subject: | Re: V1 Path and Range DTF | ||
Very nice! Here's Axis DAR coverage. You can load it after you load O's DTF and be able to see both. ~S~ -noflyz Attachment: Screen Shot 2016-06-11 at 12.19.27 PM.png [ 828.86 KiB | Viewed 2012 times ]
|
|||
| Author: | OhShix [ Sun Jun 26, 2016 10:27 pm ] |
| Post subject: | Re: V1 Path and Range DTF |
I am grounded this frame but I can do GCI for V1 intercept. download the DTF and let me know what voice comms to use. |
|
| Author: | OhShix [ Sun Jul 03, 2016 11:30 pm ] |
| Post subject: | Re: V1 Path and Range DTF |
Updated the V.DTF file. Deleted paths to the destroyed V1 launchers. I noticed V1s were West of the white line so I added a line out there to help with the interceptions. Added Allied and Axis DAR coverage lines |
|
| Author: | dewolf [ Mon Jul 04, 2016 7:03 pm ] |
| Post subject: | Re: V1 Path and Range DTF |
^^^ Nice! Thanks for including NoFlyZ "Axis Radar Range" file along with the V-1 routes. It is very handy to be able to load both files with a single command. <S> 
|
|
| Author: | OhShix [ Wed Jul 06, 2016 6:27 am ] |
| Post subject: | Re: V1 Path and Range DTF |
I am thinking 1/4 or so of the V1s are below 1000ft or they go NOE when feet dry. I do not think we failed to intercept all 56 of those Buzz Bombs but I could be wrong. Not sure what to do about them except catch them over the water. You blink and they are past you. I was a bit overwhelmed running GCI by myself. I am thinking two GCIs would be more effective, one for the north tracks and one for the west tracks. |
|
| Author: | OhShix [ Sun Jul 17, 2016 1:28 am ] |
| Post subject: | Re: V1 Path and Range DTF |
Deleted Lines to V1 launch sites that were destroyed Frame 4 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
