S3 Series
http://squadselectseries.com/s3forum/

T3 Frame 3 prelim dtf for approval
http://squadselectseries.com/s3forum/viewtopic.php?f=5&t=1311
Page 1 of 2

Author:  MuskieZZ [ Wed Apr 08, 2015 11:18 pm ]
Post subject:  T3 Frame 3 prelim dtf for approval

OK, Hawk,
This is what I drew up based on the conversations. PLEASE let me know if this is good for the 1st sortie. I will then fly it and add time hacks.

Image


Fighters! notice the DAR emitters at F6,7,21,23,30. They have a cross exactly on the emitter. That is ALL that needs to go down, the truck will NOT go down. They are very hard to see so please look beforehand.






ALSO Hawk,
Need the next targets! Choices as I see it are, F8/F4, F14 OR F18/F19

Please let me know.

Author:  Hawk [ Wed Apr 08, 2015 11:43 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

Muskie,

The route looks good. Now we need some time hacks so the escorts know where to find us.

Sortie 2 has to be simple because it depends how many planes we have left. I really think the KoN are going to be a target and want to make sure they are covered. Still, I want to make sure the UMMs have escorts too.

Author:  MuskieZZ [ Thu Apr 09, 2015 12:17 am ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

Hawk wrote:
Muskie,

The route looks good. Now we need some time hacks so the escorts know where to find us.

Sortie 2 has to be simple because it depends how many planes we have left. I really think the KoN are going to be a target and want to make sure they are covered. Still, I want to make sure the UMMs have escorts too.


I agree, I think 2nd sortie we all need to stay together. Thats why the target selection.

F4/F8 allows us to stay north and hit 2 or 5 if we didn't close it.

F14 allows us to keep the P36 out of play and the ack down for Frame 4 and hit any remaining boats.

F18/F19 has a lot of points if we can close it. Lots of oil tanks.


Please let me know.

I will start on the time hacks so we all hit together.

Author:  MuskieZZ [ Thu Apr 09, 2015 2:55 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

OK Hawk,
Here is what I came up with.

Image


Attachment:
T33a.dtf [3.5 KiB]
Downloaded 107 times


Time hacks are based off of: 75% fuel; CS 150; Level at 10K; 90% throttle

Nothing gets touched before T+40!!!!!!

KoN travels White line (Up at T+0)
UMM travels Orange Line (Up at T+4)
RCAF/NS travel Orange then Blue (Up at T+13)

wp1 and wpU1 are the exact same distance (378476.5' (71.68 miles)) to target for the UMM and the KoN. It is only 309868.8' (58.69 miles) for the RCAF/NS thats why they go latter.


The fighters are going to have to plan on covering and hitting DAR at exactly T+40

Author:  MuskieZZ [ Thu Apr 09, 2015 3:15 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

F5 was a problem frame 1. It was thought the boats were a part of it, they are not. The boat is F4.

This is all that is at F5

Image

Author:  Gums [ Thu Apr 09, 2015 7:08 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

Banzai!

BZ lately with personal stuff, but will try the "orange" line later today and may adjust run in to get great lines.

[EDIT: run in looks good, but DTF had a bad coord for rejoin point. IP and such OK.]


UMM looks like 3 planes, so will post any "available" targets soon as I make a few runs. Would prefer one pass and haul ass.

Gums-san sends...

Author:  MuskieZZ [ Thu Apr 09, 2015 8:04 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

Gums wrote:
[EDIT: run in looks good, but DTF had a bad coord for rejoin point. IP and such OK.]



What did I have wrong????

Author:  Gums [ Thu Apr 09, 2015 10:09 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf bug?

Banzai!

I shall reload the file and look for coord problems. BTW, I was first download according to the forum post.

Looks like second WP was at 0,0. But I shall check and see.

I am also gonna move the Kaga boat to make things easier for folks to practice.

Gums-san sends...

Author:  Gums [ Thu Apr 09, 2015 10:50 pm ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval - UMM error

BANZAI!

Found it.

Was a declaration error for the UMM wpU2. The orbit coords were good, as were wpU3.

Here's correct coords for the UMM route, and color might be FUBAR :

# ---- F5 attack
.strsto wpU1 143419 418920
.strsto wpU2 327512 213929
.strsto wpU3 380468 213929
.strsto red 255 0 0 255
.mapcolor @orange@
#.mapcolor @red@
.mapworldtext 70000 620000 UMM-Up at T+5
.mapline @CVStart@ @CV10@
.mapline @CV10@ @wpU1@
.mapcircle @wpU1@ 5280
.mapline @wpU1@ @wpU2@
.mapline @wpU2@ @wpU3@
.mapline @wpU3@ @F5@
.mapworldtext @wpU1@ wpU1 UMM Orbit till T+20
.mapworldtext @wpU2@ wpU2 T+35
.mapworldtext @wpU3@ wpU3 T+38
.mapworldtext @F5@ T+40

Gums-san tries...

Author:  Beaver [ Fri Apr 10, 2015 12:23 am ]
Post subject:  Re: T3 Frame 3 prelim dtf for approval

It's good to have some orbit times in case people have trouble getting off ;)

Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/